
*******************************************************************
*            *
*   Ni-Mh/Ni-Cd  (    4.2V)*
*******************************************************************


 ,   ,       (,       :)
 (.)   -   0.7 - 1 .
       -  0.2 - 0.3 

1.x	Set startup delay = X*15minutes, example: 1.2 makes 30minutes startup delay, to cancel delay enter 1.10
	     .  ,   1.2    30 .  1.10 -   .

2.x	2.1 microphone spy bug, 2.2 beacon function
	2.1 -  "". 2.2 -  ""

3.x	where "x" is FRS channel number above 1,
	  3.2    FRS-   2

3.1	Activate custom channel, to set custom channel enter six digits xxx.xxx, to enter Zero click 10 times
	  ,     FRS .  3.1 ,      ,  6    ,     . , 433.075    LPD-.

4.x	VOX sensitivity, 4.1 for highest sensitivity and 4.9 lowest, turn off VOX feature (4.10)
	VOX -   .  4. ,    ,    . 4.1 -    , 4.9 -      

5.x	VOX timer delay, x*5seconds, default is 5 (5x5=25s), that mean if VOX was not triggered within 25seconds beacon activates or if set as microphone transmitter TX stopped.
	   ,       "".    x*5 .  ,    5.5  ,    ,    25   ,   .

6.x	6.1-6.7 to set RF power, default 5 (30mW)
	 . 6.1 -  , 6.7 - .

7.x	to set deviation (volume), default 2, 
	 . 7.1 - , ,  ,  .

8.x	LED can be turned off with code 8.2 (8.1 LED on)
	    . 8.1 - , 8.2 - .

9.x	4th tone frequency offset X kHz, enter 9.10 to turn off 4th tone (default = off)
	4    ,   x    .        ,     ,    1 .  , 4  .


 ,  ,     ,     .      .

        -,     4 ,    .
 -: 5  FRS,  ,  VOX  5,  VOX  5 ,     .



in quiet room to pick normal talk (microphone mode) use code 4.1 or 4.2
onboard flying wing I set 4.5 (default) or 4.6
level 4.7 require a lot of noise to put beacon in standby mode

If you want to know what setting already stored click function number(single digit)

If you want to reduce VOX sensitivity: click 4times, count blinks, add one , enter 4.(new number) 

Now you can reset the device to default state by holding button until LED goes off (4s) , also by holding button while connecting battery(old version beacon style)
Defaults: FRS CH5, beacon, VOX sensitivity 5, delay 5, no startup delay.



   : Strannik