Activity

Zero UAV YS-S4 flight controller - самый младший брат полетного контроллера YS-X6.
Коптеры. Комплектующие, сборка, настройка.
DynamiX:

И ещё вопрос, на прошивке от WLToys v303 v75 был режим Новичка, это когда крадр управляется так, как будто он повёрнут задом

У Зеро это называется “Care free”

In GPS hover mode, “Carefree” can be used.

Option 1
Click on “enable course locked” button in “setting” page, autopilot can record the current orientation of craft nose. Then users can adjust the orientation of craft nose with rudder;when users operate the left/right aileron and push/pull sticks on transmitter, the autopilot will fly to the orientation as the course was locked, not the current orientation of craft nose.

Option 2
Within 5 seconds please switch between position1 and position2 on CH6 for five times(do not switch to position3 which is invalid, that is 1->2->1->2->1->2->1->2->1->2->1 ), then FC will enter intelligent course locked mode.
To exit “carefree”, click on “disable course locked” button in “setting” page or switch to manual mode. User can switch to manual mode and immediately back to GPS mode to continue the operation.

Обсуждаем ZERO UAV YS-X6 Multi-rotor Flight Controller
Коптеры. Комплектующие, сборка, настройка.
Basil:

Заказал, какой то мутняк на их сайте и продают, где 50 точек, а где 128, мне кажется он модификация Х4 Р .

Версия X4-P - по GPS более точная, без ограничения расстояния, 50 точек, работает только с S-BUS приемниками и поддерживает подвесы ZeroUAV Z1400/Z2000/Z3000/Z6000
X4V2 - фактически как YS-X4W или YS-X4N, которые работают с любыми приемниками, но только с 128 точками и менее точная чем X4-P. Подвесы ZeroUAV Z1400/Z2000/Z3000/Z6000 - НЕ ПОДДЕРЖИВАЕТ!!!

Обсуждаем ZERO UAV YS-X6 Multi-rotor Flight Controller
Коптеры. Комплектующие, сборка, настройка.
Ustas69:

А откуда информация про Zero OSD? Киньте ссылкой, пжлст.

по дилерским каналам … сами себе новости на rcdesign создаем… пусть буржуи здесь читать учаться или через гугл )))

Обсуждаем ZERO UAV YS-X6 Multi-rotor Flight Controller
Коптеры. Комплектующие, сборка, настройка.
Andrey_Ch:

А на какой передатчик эта штука будет сигнал отдавать? что бы на земле его взять?

через V out

1.TX power supply and AV signal line, which can be used to provide 5V voltage to the chart of TX Red Line for the positive power supply, black as the cathode of the power supply, the white AV signal output.

  1. camera power supply and AV signal line, 5V voltage is used to provide the camera. The red line for power supply

Cathode, black line for the negative electrode of the power supply, the white AV signal input.

3.Wifi (radio) power line voltage of 5V, can be used to provide Wifi radio. The red line for power

Pole, black as the cathode of the power supply.

4.serial data output line, the line is connected with the data input port of Wifi (radio).

5.serial data input line, the line connecting flight control serial data output port.

6.OSD main power line, the line of aircraft mains connection, compatible with 2S~6S cells.

7.mode switch key and mode indicator.

8 Micro SD

Обсуждаем ZERO UAV YS-X6 Multi-rotor Flight Controller
Коптеры. Комплектующие, сборка, настройка.

Zero OSD

OSD data processing module for zero flight control design for aircraft, the voltage, the GPS coordinate, return point coordinates, height, speed, throttle, pitch, roll and other important flight data through the module added to the video, completely solve the problem about the flight data of flying hands during flight can not real time, help flying hands more relaxed, free flight experience. Power supply and can provide 5V 2A for video input, output device (GOPRO3)

Basic parameters:
Support: Gemini Autopilot,X4P, X6P, X4, S4, zero full range of flight control products
Working voltage: 2-6s lithium battery
Host size: 50*46*12mm
Weight: 40g (including wire)

Цена ~119$

Zero UAV YS-S4 flight controller - самый младший брат полетного контроллера YS-X6.
Коптеры. Комплектующие, сборка, настройка.

A. Excellent Appearance Material
All-metal casing to create, fine cutting technology to bring you a new texture experience.
B. lighter and more compact control module
Small size, light weight, making installation easier and significantly reduced body weight, performance even more remarkable.
C.GPS navigation
Contains a GPS module, precise positioning and automatic hover return.
D. P C assistant software, compatibility stronger
Scheduling software compatible PC side YS-X4 down the line protocol, the perfect extension WIFI module, handheld Scheduling, monitoring flight parameters.
E. super-configuration
(1) perfect support for 4-axis, 6-axis;
(2) Built-IMU, a new integrated design;
(3) a set of high precision, fixed;
(4) support PPM mode and conventional receiver;
(5) Support USB upgrade;
(6) increase the low voltage automatic landing;
(7) Fail Safe Mode 3 selectable: landing-place, automatic hover, landing return (GPS positioning);
(8) the depth filter accelerometer to improve shock resistance;
(9) raised to correct the frequency of 250HZ 400HZ, improved control stability.

Component products included:
(1) Master * 1 (built-IMU);
(2) GPS module * 1;
(3) LED light * 1;
(4) GPS bracket * 1;
(5) Power Module * 1;
(6) for wiring * 6.