Но запрещать удлиннять провода к мотору… Очень странно.
Наоборот вполне логично -у нас бездатчиковые моторы, о положении и состоянии мотора контроллер узнает по наведенной ЭДС на обмотках мотора - но ведь при этом у нас на этих же обмотках присутствуют силовые импульсы раскручивающие мотор. Причем сопротивление обмоток мало, при длинных проводах их сопротивление начинает оказывать свое влияние…
Очень странно.
Причем сопротивление обмоток мало, при длинных проводах их сопротивление начинает оказывать свое влияние…
Ничего странного, только ИМХО, не сопротивление оказывает, а индукция, получается система: индуктивность проводника + индуктивность катушки. Сопротивление у довольно толстого медного проводника от Регуля к мотору, всё же довольно небольшое, а вот наведенная индукция, плюс поля рядом находящихся проводников, у бездатчиковых регуляторов могут вызвать рассинхронизацию с вытекающими 😃
Но запрещать удлиннять провода к мотору… Очень странно.
Соберусь использовать Jeti Spin - так и поступлю 😃)) А Jeti Advance прекрасно живет с метровыми проводами к мотору - ему можно, судя по его мануалу 😃))
Владимир
Вся информация о проводах (моторных и батарейных), конденсаторах итп появилась не от скурпулёзных исследований тутошних фуромчан, или американских. Ето выплыло на западных форумах - и если вы напишите и-майл например в Касел-Криэйшен - то вам пришлют вот этот стандартный ответ о длине проводов
>>>>>
Try not to exceed 30" of wire on the battery side, or 16" of wire on the motor side, especially if you are running the controller near its limits.
The reason is this: Lengthening the battery wires increases the resistance between the controller and battery, which increases voltage ripple. When running near the controller voltage limits, this additional voltage ripple can break down the FETs, and eventually cause damage to the controller. Lengthening the motor wires increases the resistance between the controller and motor, which makes it more difficult for the controller to accurately commutate the motor, which increases current ripple, which is harder on the FETs. Longer motor wires also increases the amount of radiated noise in the system more than longer battery wires.
Try not to exceed 30" of wire on the battery side, or 16" of wire on the motor side, especially if you are running the controller near its limits. Also, using heavier gauge wire reduces the effect of longer wires. (for example, using 13ga wire in a 30 amp system with long wire runs would be better than the standard 16ga.)
<<<<
Если языка не знаете можете воспользоваться вот этим translate.google.com
Коряво будет но понятно. JETI шлёт подобную инфо по запросу.
2 Влад:
Спасибо большое ! Наконец-то объяснение не на уровне “да-нет” или “верю-не верю”, а с указанием применимости ограничений. Это, кстати, объясняет, почему мои эксперименты с длинными проводами проходили без сучка, без задоринки. Контроллер работал с недогрузом по току процентов на 20, и с батареей 4S вместо предельных 6S. И провода были весьма толстые…
А насчет языка… Как можно не знать технического английского ? Смешно даже. Я ж советский инженер 😃)
2 Влад:
Спасибо большое ! Наконец-то объяснение не на уровне “да-нет” или “верю-не верю”
Да это не мне спасибо, а некому Патрику, из Касел-Криейшен. 😌
а некому Патрику
Ведущий инженер Касела однако.
{"assets_hash":"a8b26fa7f6e768b07a72c8c9aadb9422","page_data":{"users":{"4050b8203df9550077794f6d":{"_id":"4050b8203df9550077794f6d","hid":3025,"name":"RedSun","nick":"RedSun","avatar_id":null,"css":""},"468a1fa63df9550077782e51":{"_id":"468a1fa63df9550077782e51","hid":25122,"name":"Володимир","nick":"Володимир","avatar_id":null,"css":""},"4777b5bf3df955007777edb8":{"_id":"4777b5bf3df955007777edb8","hid":30297,"name":"spyder3","nick":"spyder3","avatar_id":null,"css":""},"4da186f93df9550077753de8":{"_id":"4da186f93df9550077753de8","hid":85568,"name":"Ирбиус","nick":"Ирбиус","avatar_id":null,"css":""},"4ee4d8ad3df955007774b151":{"_id":"4ee4d8ad3df955007774b151","hid":108033,"name":"kinshas","nick":"kinshas","avatar_id":null,"css":""}},"settings":{"can_see_ip":false,"can_report_abuse":false,"can_see_hellbanned":false,"forum_can_view":true,"forum_can_reply":false,"forum_edit_max_time":30,"forum_can_close_topic":false,"forum_show_ignored":false,"forum_mod_can_delete_topics":false,"forum_mod_can_hard_delete_topics":false,"forum_mod_can_see_hard_deleted_topics":false,"forum_mod_can_edit_posts":false,"forum_mod_can_pin_topic":false,"forum_mod_can_edit_titles":false,"forum_mod_can_close_topic":false,"can_vote":false,"forum_mod_can_add_infractions":false,"forum_topic_title_min_length":10,"forum_reply_old_post_threshold":30,"votes_add_max_time":168,"forum_show_post_interval":7,"can_see_deleted_users":false},"section":{"_id":"61c9a54c3df9550077bb517d","hid":87,"title":"Бортовая электроника","parent":"61c9a54c3df9550077bb50fc","description":"Рулевые машинки, гироскопы, индикаторы питания и т.п.","is_category":false,"is_votable":true,"is_writable":true,"cache":{"topic_count":2531,"post_count":34029,"last_post":"678e0466f9bb00ab8954b071","last_topic":"678bd33f6bffb2a544de44b9","last_topic_hid":572591,"last_topic_title":"matek h743 wing + ardupilot, проблема с настройкой каналов сервомашинок","last_ts":"2025-01-20T08:08:06.208Z","last_user":"41dd37293df95500777929a4"}},"topic":{"_id":"4ebebdfb3df95500774604eb","hid":254966,"title":"Внимание \"Impact 80\"","views_count":5542,"last_post_counter":77,"cache":{"post_count":77,"first_post":"4ebebdfb3df95500774608de","first_ts":"2011-11-12T18:42:03.000Z","first_user":"4657326c3df9550077784115","last_post":"5107cd863df9550077460976","last_post_hid":77,"last_ts":"2013-01-29T13:24:22.000Z","last_user":"4ee4d8ad3df955007774b151"},"st":1,"section":"61c9a54c3df9550077bb517d"},"subscription":null,"pagination":{"total":77,"per_page":25,"chunk_offset":71},"posts_list_before_post":["paginator","datediff"]},"locale":"en-US","user_id":"000000000000000000000000","user_hid":0,"user_name":"","user_nick":"","user_avatar":null,"is_member":false,"settings":{"can_access_acp":false,"can_use_dialogs":false,"hide_heavy_content":false},"unread_dialogs":false,"footer":{"rules":{"to":"common.rules"},"contacts":{"to":"rco-nodeca.contacts"}},"navbar":{"tracker":{"to":"users.tracker","autoselect":false,"priority":10},"forum":{"to":"forum.index"},"blogs":{"to":"blogs.index"},"clubs":{"to":"clubs.index"},"market":{"to":"market.index.buy"}},"recaptcha":{"public_key":"6LcyTs0dAAAAADW_1wxPfl0IHuXxBG7vMSSX26Z4"},"layout":"common.layout"}
We use cookies and web analytics services. By continuing to use our
website, you consent to the use of cookies or similar technologies on
this website, including third-party statistics and web analytics services,
which may in some cases collect and process information about your visit
and activity. To find out more, see rules of this website.