2 RC Туполев Ту-134
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
I’m now Building the Ty-134’s main fuselage back-bone or Kiel, I use a crabon fiber strip for strength and cut holes into it to save weight.
This is what your looking at.
[IMG]
[/IMG]
This is the main 1 inch foam backbone of my Ty-134.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Now I’m adding the fuselage bulkheads from 5mm foam hot-wired and with weight-saving holes cut in.
I’m also running the nose gear servo wires through to the Ty-134’s nose.
Good looking!!
Good looking!!
большое спасибо!
You could cut out all pink foam between holes later to save weight, I guess…
You could cut out all pink foam between holes later to save weight, I guess…
I thought about that Sir but it would weaken the structure.
just make 2 different ones… to compare
when you’ll cover this “tube” by foam skin it will rise it’s strenght
blue frames will take all cross-sectional forces
side and top/bottom spars/stringers (you’ll add them later, i think) and skin should take a lateral ones
большое спасибо!
Are u learning russian???😃😃
Are u learning russian???😃😃
Я НАДЕЖДА ТАК:(
ИДЕАЛ МОГУЩЕСТВО ЗАХВАТ ПЯТЬДЕСЯТ ГОДЫ😒
when you’ll cover this “tube” by foam skin it will rise it’s strenght
+100
your foam strcture need only for making shape, not more. U can cut mach more and may be use 0.5" pink foam. That enough for aerodynamical forces. And nothing save u from crush
just make 2 different ones… to compare
when you’ll cover this “tube” by foam skin it will rise it’s strenght
blue frames will take all cross-sectional forces
side and top/bottom spars/stringers (you’ll add them later, i think) and skin should take a lateral ones
Very good idea Mr Позняк! ХОРОШИЙ ИДЕЯ!!😁
www.youtube.com/watch?v=4nhjcqA5kNg
СМЕШНОЙ МАТЕРИАЛ!:lol:
That episode was made in “Ульяновск центральный” airport.
one more nice airliner will born 😃 Welcome
That episode was made in “Ульяновск центральный” airport.
Я ВИДЕТЬ. . . . . ИСПЫТЫВАЮЩИЙ !😁
[QUOTE=mike_fish;3219494]one more nice airliner will born 😃 Welcome[/QUOTE
ВАШ ОПРЕДЕЛЕННЫЙ ЛУЧШИЙ!😁
ДВОЕ РЕЙСОВЫЙ ВОЛЯ РОЖДЕННЫЙ😆
Смотрится хорошо.
Пишите пожалуйста на английском, т.к. машинный перевод ужасен.😉
Looking good.
Please write english only, because your machine translations are horrible 😉
А я за машинные переводы!
ИДЕАЛ МОГУЩЕСТВО ЗАХВАТ ПЯТЬДЕСЯТ ГОДЫ😒
Звучит монолитно фундаментально, вы не находите?😆
Super project:)
I will keep watching this topic.
Good luck!
Смотрится хорошо.
Пишите пожалуйста на английском, т.к. машинный перевод ужасен.😉Looking good.
Please write english only, because your machine translations are horrible 😉
Sorry!😦
А я за машинные переводы!
Звучит монолитно фундаментально, вы не находите?😆
Super project:)
I will keep watching this topic.
Good luck!
Thankyou Sir!😁
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Now I’m Hot-wiring the Ty-134’s Nose section out of solid foam that is used to insulate houses here In the U.S.
Смотрится хорошо.
Пишите пожалуйста на английском, т.к. машинный перевод ужасен.😉Looking good.
Please write english only, because your machine translations are horrible 😉
Sorry!😦
А я за машинные переводы!
Звучит монолитно фундаментально, вы не находите?😆
Super project:)
I will keep watching this topic.
Good luck!
Thankyou Sir!😁
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Now I’m Hot-wiring the Ty-134’s Nose section out of solid foam that is used to insulate houses here In the U.S.
this Video for a MD-80 nose will show you how I “hot-wire” cut out shapes from foam.
[IMG]
[/IMG]
[IMG]
[/IMG]
Here are my 2 DC-9’s . . . . .the American Copy of the Ty-134!😁
Very nice project!
Can’t wait to see the final result!
Very nice project!
Can’t wait to see the final result!
Thankyou my friend!
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Here are the solid foamTU-134 nose sections placed on-top of the fuselages
Kind looks like a fish skeleton Lol😆
Most of RC jets are made after fighter jets - it makes any model of a commercial jet much more interesting; and it even more interesting when done with hi level of details!